Home / News / 7 Tips for a Better Experience Using Spray Foam Insulation

7 Tips for a Better Experience Using Spray Foam Insulation

Improving the energy efficiency of homes and businesses can cut utility costs by a lot. It has been estimated that if businesses were to improve the energy efficiency of their spaces by a mere 10%, nearly $40 billion would be saved by companies across the United States. Spray foam distributors say that using this kind of insulation can go a long way in lowering the amount of energy that is used to heat and cool buildings around the nation. Here are some tips for a better experience using spray foam insulation products:

  1. Know the difference between spray foam and injection insulation systems. Many people have seen the spray foam rigs that use a “point and shoot” method. Foam injection may not have the same visibility but can be just as useful. Spray foam distributors note that both methods produce the same level of expansion for the foam insulation. The main difference is the rate by which the expansion occurs. If you use the injection system, you need to take more time as it is easy to spray too much because the foam takes longer to grow into its final size.
  2. Be careful with the ratio. Both kinds of spray insulation techniques have a specific ratio of products. Getting the wrong ratio can have disastrous effects. The foam can end up being either not at all effective or, in a worst-case scenario, it can be toxic to humans and animals. Some spray foam machines will not function if the ratio is off. To be on the safe side, talk to your local spray foam distributors to get the best information on the right ratio.
  3. Be mindful of the thickness of the foam. Every foam product has its own recommended thickness level. To make sure you get yours right, check with the material that came with the spray insulation itself or consult the manufacturer’s website for more information. For the most part, the thickness should run somewhere between 1.5 and 2 inches but it can be as large as 6 inches, so go with the instructions from the manufacturer.
  4. Start with the right temperature. The temperature of the foam insulation you are using can make a difference in how easy it is to install the insulation. If the foam is too cold, it may not be able to expand the way it should or the ability it has to bond with the surface can be impacted. Using foam that is too hot can also cause issues with the quality of the insulation. If you are unsure what the correct temperature is, consult local spray foam distributors to get the right information.
  5. Patience is your friend. As with many projects around the home or office, patience is an important trait to have. You need to wait between applying the layers of your spray foam. After each layer, you need to make sure the foam has had enough time to expand (for injection foam) or cool down (point and shoot). This is crucial for the efficacy of the foam insulation.
  6. Get the right product for your job. There are pros and cons to using point and shoot spray foams vs. injection foam. A lot of it depends on the size of the space you are dealing with. An open space, such as a roof, will need a different kind of spray foam insulation material than if you are putting insulation in under a road.
  7. Make sure you use your equipment correctly. There are a number of different settings in which spray foam equipment can be used. If you are working on insulating a space that is indoors, you will have different considerations to make than if you are working outside. The actual equipment is different, of course, as are the setup requirements. Take care to get the right instructions from the spray foam distributors in your area. There may be other factors you need to think about before you start your spray foam insulation job.

Spray foam distributors say that while there are precautions that need to be made, using spray foam insulation products is a lot easier than other kinds of insulation. It just takes time, patience, and some effort.

Back to News