The Reactor A-XP1 is a Graco-engineered coatings proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality coating.
- Maintains temperature setpoints for better yield
- Maintains consisten output pressure for uniform spray pattern
- Easy to operate and maintain
- Best choice for affordability and durability
This entry-level, high-pressure, air system is best for low to medium-output applications and is an excellent value for both residential and commercial use.
Like the popular A-25, the A-XP1 has easy to use digital controls, giving the air systems ability to maintain consistent temperature control – even when spraying at maximum flow rates – resulting in a better quality coating.
The A-XP1 is designed to spray up to 1.5 gal/minute at the max temp of 170°F and pressures up to 3500 psi; making it ideal entry-level system designed to spray both hybrid and pure polyureas.
The Reactor air systems use three independent heat zones allowing for precise control of the iso, resin and hose heat; making this a reliable solution for spraying different chemical viscosities.
Giving your customers peace of mind, the Reactor A-XP1 and A-25 use the Graco trusted NXT® Air Motor, allowing low air consumption for increased efficiency.
Packages & Pricing
Reactor A-XP1 systems are available in the basic package with one 50-foot hose, 10-foot whip hose and choice of gun. To order this package, replace the first two part numbers with the gun type. Fusion AP = AP; Probler P2 = P2
One part number can be field configured into the following:
230V, 1-phase – 56 Amps
230V, 3-phase – 46 Amps
380V, 3-phase – 26 Amps
Reactor A-25, A-XP1 Plural Component Proportioner | |
Maximum Fluid Working Pressure |
3500 psi
|
Maximum Air Supply Pressure |
125 psi
|
Maximum Air Working Pressure |
100 psi
|
Pressure Ratio |
35:1
|
Air consumption with 02 tip at 1500 psi stall pressure |
28 scfm
|
Machine Maximum Power with hose |
13,000 Watts
|
Voltage Requirement (50/60 Hz), (230 V Nominal: 195-253 VAC), (380 V Nominal: 338-457 VAC) |
230 V, 1 Phase, 230 V, 3 Phase (Delta), 380 V, 3 Phase (WYE 220 V to Neutral)
|
Amperage Requirement (Full Load Peak)* |
56 amps @ 230 V, 1 Phase, 45 amps @ 230 V, 3 Phase, 26 amps @ 380 V, 3 Phase
|
Maximum Heater Fluid Temperature |
190°F
|
Maximum Hose Fluid Temperature |
180°F
|
Maximum Ambient Temperature |
120°F
|
Maximum Output |
25 lb/min
|
Output Per Cycle (A and B) |
0.017 gal/cycle
|
Heater Power |
10,200 Watts
|
Hose Power |
2790 Watts
|
Sound Pressure (see NXT air motor manual) |
70.2 dB(A)
|
Sound Power (see NXT air motor manual) |
80.1 dB(A)
|
Viscosity Range |
250–1500 centipoise (typical)
|
Maximum Fluid Inlet Pressure |
300 psi or 15% of output pressure
|
Fluid Inlet/Strainer Filter |
20 mesh standard
|
Air inlet Filter Mesh |
40 Micron
|
Component B (Resin) Inlet |
3/4 npt(f) swivel
|
Component A (Isocyanate) Inlet |
3/4 npt(f) swivel
|
Recirculation/Block Hose Connections |
Iso (A) side: #5 JIC (m); Resin (B) side: #6 JIC (m)
|
Maximum Heated Hose Length *** |
210 ft of 3/8 ID
|
Weight |
310 lb
|
Wetted Parts |
Carbon steel, stainless steel, chrome, aluminum, Fluoroelastomer, PTFE, nylon
|
Manufacturer Part Number: 24Y164