Handi-Foam 2-13 Handi-Flow Slow Rise Pour Kit FOMO P10732


Handi-Flow Pour-In-Place Slow Rise
For Professional Use Only


Handi-Foam P10732

Manufacturer Part Number: P10732


Handi-Foam 2-13 Handi-Flow Slow Rise Pour Kit P10732 Handi-Flow® Pour-in-Place foams are polyurethane foams specifically designed to fill and insulate large voids and blind cavities.

Handi-Flow products are dispensed using the patented Handi-Gun® Dispensing Unit for accurate and precise applications. Handi-Flow Pour-in-Place Foams are available in a variety of sizes, from disposable kits to large refillable systems. Handi-Flow® Pour-in-Place Foams are chemically cured systems, engineered with a slower cure time than our spray foams allowing the foam to flow throughout the cavity to fill the entire void. In addition to insulating, Handi-Flow can be used to add structural support, provide buoyancy, prevent vibrations and deaden sound. Handi-Flow® Slow Rise meets the Coast Guard requirements for floatation.

Additional formulations for intricate mold filling or cinder block filling are also available. Typical applications include: insulating refrigerated trailer floors and walls strengthening vinyl and aluminum extensions filling openings in boats and pontoons filling blind cavities and narrow openings


Technical Specs

  • ItemHandi-Flow Slow-Rise Kit
  • Number of Components1
  • Size37.8 lb.
  • Container TypeAerosol Can
  • Indoor/OutdoorIndoor/Outdoor
  • ColorYellow/White
  • Insulation ValueR-5.9
  • Expansion Ratio3-5:1
  • Coverage13 cu. ft.
  • Application Time30 to 60 sec.
  • Full Cure1 hr.
  • Application Temp. RangeNot Specified
  • Performance Temp. Range-200 Degrees to 240 Degrees F
  • Flash Point240 Degrees F
  • Specific Gravity1.2
  • SubstratesAll Except Polyethylene, Polypropylene, Silicone, Oils, Greases, Mold Release Agents And Similar Materials
  • ApplicationVoid-fills and Cavity-fill
  • StandardsMeets Coast Guard Specification Requirements For Flotation in Title 33 Code of Federal Regulations, Paragraph 183.114; ASTM E-84 Class II Fire-rated; UL-94 Rated
  • IncludesGun And Hose Assembly And Initial 8-pk Of Nozzles

Application Tips:

  • Temperature: Spray foam products are temperature sensitive.  You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.

  • Shake Well: Prior to using this kit, the canisters must be shaken well.  One way to achieve this with the larger kits is to remove the tank from the box and roll it back and forth on the ground with your foot for at least 2 minutes.

  • Change Nozzles: It is important to change the nozzle after you stop spraying for more then 30 seconds.  Failure to change nozzles may result in damage to the spray gun.

  • Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times.  As soon as you are done spraying, remove the nozzle and drop it in a can of acetone.  You can also use our Handi-Cleaner to clean out uncured foam.

  • Safety Considerations: Our Safety Kit includes a tyvek suit with hood, respirator, goggles, and 2 pairs of gloves.

  • Clean Up: You can clean up uncured foam with Handi-Cleaner.  Once foam is fully cured, you will have to remove it by mechanical means.

Manufacturer Part Number: P10732

Manufacturer Part Number: P10732

Additional information

Weight80 lbs
Dimensions.1337 × .1337 × .1337 in
Free Shipping




Display in Product Feed (1 = Yes; 0 = No)



There are no reviews yet.

Be the first to review “Handi-Foam 2-13 Handi-Flow Slow Rise Pour Kit FOMO P10732”

Your email address will not be published. Required fields are marked *

This product has no available downloads.

You may also like…