Chem-Trend SprayFoam Silicone is a blend of silicone’s and specialized parting agents that are specifically designed to prevent spray polyurethane foam insulation from adhering to most surfaces where the product is applied.
Chem-Trend SprayFoam Silicone acts as an effective barrier coat to keep overspray of polyurethane foam insulation from adhering to items such as spray equipment, tub & shower stalls and other non-porous surfaces.
Recommended Use:
Applications Rigid spray polyurethane insulationĀ foam
Recommended Temp.Ā Range;
(Ā°F/Ā°C) Ambient room temp. to 167Ā°F/75Ā°C
Application
1. Shake can well when starting a new can.
2. Thoroughly clean the application surface with a
Chem-Trend cleaner to remove excessive
amounts of dirt and contaminants. Wipe dry with
a clean cloth or towel.
3. Hold aerosol spray can 8-10″/20-25 cm from
application surface. Apply a light, uniform coating
using a sweeping motion.
PuraĀ® Insulation Release can also be applied with
a soft-bristled brush, or wiped on with a cotton
cloth.
4. Reapply as needed to ensure adequate releaseĀ ease.
Applications Rigid spray polyurethane insulationĀ foam
Recommended Temp.Ā Range;
(Ā°F/Ā°C) Ambient room temp. to 167Ā°F/75Ā°C
Application
1. Shake can well when starting a new can.
2. Thoroughly clean the application surface with a
Chem-Trend cleaner to remove excessive
amounts of dirt and contaminants. Wipe dry with
a clean cloth or towel.
3. Hold aerosol spray can 8-10″/20-25 cm from
application surface. Apply a light, uniform coating
using a sweeping motion.
PuraĀ® Insulation Release can also be applied with
a soft-bristled brush, or wiped on with a cotton
cloth.
4. Reapply as needed to ensure adequate releaseĀ ease.
Manufacturer Part Number: 108333
