In 2012 WINCO created the WINPOWER ‘DE’ line of simplified diesel generator skids for industrial applications. We are excited to add a generator/compressor combo unit to our DE lineup. The DE4040 has output of 40kW with 40 CFM @ 120 psi. It is the only 40/40 generator/compressor unit specifically designed for trailer applications with a Cummins/Stamford generator end. This model features a rugged 10HP Rotorcomp rotary screw air compressor, Stamford generator, 54 gallon fuel tank, 2A battery charger, block heater, and a simplistic key start. This model is perfect for applications requiring an air compressor and a small footprint!

Standard control bank includes key start, hour meter, shutdowns for low-oil, over-speed, and high temperature. This compact diesel generator is CARB approved, available to residents of California.

GENERATOR FEATURES:

• Standby rated
• Single step 100% load tested
• Wound 2/3 pitch for low harmonic distortion
• Class H insulation
• EPA CARB Tier 3 Compliant
• Automatic voltage regulation standard steady state voltage +/-1.5%
• Rubber engine & generator vibration isolation mounts.  No need for isolation pads & extends the life of batteries & housing.

DSE 702 KEY START CONTROLLER:

Deep Sea digital genset controllers are highly advanced microprocessor controllers.  Units come standard with simple key start controllers.  Controllers are equipped with an hour meter, low oil and over speed and over temperature safety shutdowns.

ENGINE SPECIFICATIONS:

Make/Model:  FPT Iveco N45 SM1

Type:  Diesel

Governor:  Mechanical

Cylinders:  4

Total Displacement: 4.5L

Aspiration:  TurboCharged

Oil Filter Replacement:  600 Hours

Exhaust Outlet Size @ Muffler(ships loose):  3 Inches

Alternator:  90 amps

Starter: Bosch

Battery (Not Included):  BCI 24 Minimum 650 CCA

ALTERNATOR SPECIFICATIONS:

Rating:  (105/40°C) Standby

Type:  4 Pole-Revolving Field

Speed: 1800 RPM

Insulation System:  Class H

Single Phase:  4 Lead

Three Phase:  12 Lead

Pitch:  2/3

THD:  <5%

Coupling:  Flexible Disc

Bearings (Maint Free):  1

Automatic Voltage Regulation:  +/-1.5%

Single Phase Power Factor:  1.0

Three Phase Power Factor:  0.8

COMPRESSOR SPECIFICATIONS:

Type: Rotorcomp NK 31 Rotary

Horse Power: 10 HP

Oil Capacity: 101.4 oz (3.17 Qts)

Max Delivered Qty: 42 CFM

Max Operating Pressure: 218 PSI (15 BAR)

Max Outlet Temp: 230 °F (110 °C)

Max Ambient Temp: 115 °F(46 °C)

Cooling System: Oil to Air & Air to Air

Air Service Connection: 3/4″ NPT

Units are set to operate at 40CFM @ 120PSI.  See operators manual for adjustments and maintenance schedule.

Fuel Consumption

100% Load ………………………………………… 4.57 Gallons/Hr

50% Load ………………………………………….. 2.72 Gallons/Hr

Derating Factors

Temperatures > 104°F …………………………………… 3% per 10°F

Altitude ……………………………………………………… 3% per 1000 ft

Prime Power …………………………………………………………….. 10%